E-books & White Papers

Community Road Network Guide to Best Practices v. 4.0

Issue link: https://resources.esri.ca/i/1522200

Contents of this Issue

Navigation

Page 22 of 55

Figure 21 Minimum Size of a Road Element Figure 20 Cul-de-Sac with a Central Island Minimum 2.0 m 1 2 3 4 5 6 7 8 9 10 11 12 14 an ellipse), called a bulb, as shown in Figure 20. e bulb allows editors to correctly record the even and odd addresses along its sides. 3.2.6 Winter Roads and Ice Bridges For winter roads and ice bridges over water bodies, editors should only represent their approximate location. A detailed representation of these roads is not required since their location may vary by season. For these types of features over land, how- ever, editors should represent their seasonal paths when they exist, but due to their shifting locations, winter roads and ice bridges do not require positional accuracy. 3.2.7 Minimum Size of a Road at Junctions e NRN suggests that the minimum length for a road segment between two end points should never be shorter than half the width of a standard lane, which is approximately 4.0 meters. As illustrated in Figure 21, editors should therefore only represent roads with a minimum length of 2.0 metres. Community Road Network Guide to Best Practices v4.0 14

Articles in this issue

view archives of E-books & White Papers - Community Road Network Guide to Best Practices v. 4.0